Why choose us
Dual protection of chemical protection and high temperature tolerance
Based on the molecular inertness of EPTFE (C-F bond energy is as high as 485kJ/mol), the protective clothing can block 98% of concentrated sulfuric acid, 40% sodium hydroxide and organic solvent penetration (ASTM F739 continuous contact test for 72 hours without penetration), and at the same time, the filtration efficiency of PM0.1 particles is >99.6% through the adjustment of the honeycomb microporous structure (pore size 0.2-5μm). In high temperature scenarios, the material is fluorinated to form a heat reflective layer (infrared reflectivity >85%), combined with the low thermal conductivity of the PTFE matrix (0.25W/m·K), which can delay heat transfer for more than 15 minutes (EN ISO 11612:2015 Appendix B test).
Intelligent flame retardant and ergonomic innovation
Through the synergistic effect of embedded flame retardant silicone strips (LOI>32%) and EPTFE substrate, the protective clothing showed excellent performance in the EN 469:2020 test: exposed to 10kW/m² thermal radiation environment, the material's residual tensile strength was >500N, no droplets were generated, and the shrinkage rate in a 260℃ oven was <3%. The joints are designed with a bionic fish scale structure, and the laser-cut EPTFE elastic diaphragm (elongation>400%) and Kevlar fiber reinforcement increase the elbow/knee range of motion to 160°, while maintaining 5,000 friction cycle durability under the EN 530 wear resistance standard.
Cross-border certification and scene adaptation
This protective clothing has passed certification in multiple fields such as chemical, electronic, and energy:
• Explosion-proof certification: ATEX 2014/34/EU Directive IIB level, suitable for oil and gas platforms
• Clean room compatibility: ISO Class 5 clean room particle release <0.5μg/m³
• Extreme climate verification: Withstand -55℃ low temperature bending (ASTM D746) in Arctic scientific expeditions and 70℃ high temperature exposure test in the Sahara Desert (ISO 105-B02)
Our Factory
Our factory specializes in the production of e-PTFE and its composite materials, with over 10 years of industry experience. We carefully select high-quality raw materials and strictly control every aspect of production to ensure flawless products. At the same time, we implement comprehensive quality inspections to ensure product reliability. The factory has a professional R&D team that can work with customers to carry out customized R&D projects. In addition, we have established long-term cooperative relationships with suppliers, and achieved cost savings by optimizing production processes and cost control, and relying on large-scale production and automated processes. We are always committed to providing customers with high-quality, customized e-PTFE and composite materials products, and winning the market's trust with professionalism and focus. Welcome new and old customers to consult and order.
Hot Tags: eptfe protective clothing, China eptfe protective clothing manufacturers, suppliers, factory, ptfe semi finished products, , E PTFE Waterproof Clothing Membrane, PTFE Rod, E PTFE Microporous Air Film, EPTFE Sewing Thread
