EPTFE Hydrophobic Clothing

EPTFE Hydrophobic Clothing
Product Introduction:
​​Resistance:​​ -150℃~300℃
​​Breathability:​​ >10,000g/m²·24h
​​Hydrostatic Pressure:​​ >20,000mmH₂O
​​Air Permeability:​​ <1cfm
​​Pore Density:​​ 9B/in²
​​Thickness:​​ 30-50μm
​​Weight:​​ 100-300g/m²
​​Tensile Strength:​​ 30N/mm
​​Tear Strength:​​ 5N/mm
​​UV Resistance:​​ UPF50+
Send Inquiry
Description
Technical Parameters

Expanded polytetrafluoroethylene (EPTFE) is nano-expanded by biaxial stretching to form a 0.1-5μm three-dimensional interconnected microporous structure. Its surface chemical inertness and physical micro-nanostructure work together to achieve super hydrophobic properties (contact angle>150°):

​Chemical hydrophobicity: high C-F bond energy (485kJ/mol), extremely low surface free energy (18-22mN/m), and naturally water-repellent.
​Physical hydrophobicity: micropores and nano-scale protrusions (Cassie-Baxter model) form an air cushion layer to reduce the solid-liquid contact area.

 

EPTFE hydrophobic clothing

Product Advantages

 

Nano-scale structural design​

​Gradient pore size control​: 0.1μm micropores in the outer layer block liquid water, 1μm pores in the middle layer are permeable, and 5μm macropores in the bottom layer enhance air permeability (hydrostatic pressure>30,000mmH₂O, ISO 811).
​Self-repairing surface​: Pre-embedded fluorosilicone microcapsules release repair agents after wear, and the contact angle recovery rate is>95% (ASTM D7250).

 

​Process innovation​

​Fluorine-free biaxial stretching​: Aqueous dispersants replace PFOA/PFOS (EPA 537.1 detection limit <1ppb), and the stretching ratio is 10:1 to form a nanofiber mesh structure.
​Plasma modification​: Ar/O₂ plasma etching enhances surface roughness (Ra>1μm), and the contact angle is increased to 160° (SEM verification).

 

​Lasting hydrophobicity verification​

​UV aging​: After 5,000 hours of QUV, the contact angle is >145°, and the hydrophobic life is 5 times longer than that of traditional PU coatings (ASTM G154).
​Industrial washing​: After 50 times of 80°C machine washing, the hydrophobic performance decay is <3% (ISO 6330), and there is no plasticizer precipitation (GC-MS detection).

Our Factory

 

Our factory has been focusing on the production of e-PTFE and composite materials for over 10 years. We strictly select raw materials, strictly control production, and strictly inspect quality. We have a professional R&D team that can customize R&D and have long-term cooperation with suppliers. We reduce costs through optimized processes and large-scale automated production. We have won the trust of the market with high-quality, customized products and professional and focused attitude. We sincerely invite customers to consult and place orders.

Kaili eptfe equipment
Kaili eptfe factory

 

Hot Tags: eptfe hydrophobic clothing, China eptfe hydrophobic clothing manufacturers, suppliers, factory, eptfe clothing purchase, eptfe clothing padding, eptfe chemical resistant clothing, eptfe high performance clothing, eptfe outdoor clothing, eptfe comfortable clothing

Send Inquiry
And Start Your RFQs Now.
contact us