
Product Advantages
Directional moisture management
Unidirectional moisture conduction: The inner layer of hydrophilic fiber quickly absorbs sweat through the capillary effect (contact angle <10°), and the outer layer of hydrophobic EPTFE membrane blocks liquid reverse osmosis, and the humidity regulation efficiency is 5 times higher than that of traditional cotton blends.
Medical grade breathable: When used for surgical gowns, the bacterial filtration efficiency (BFE) is >99.9% (ASTM F2101), and the moisture permeability is maintained at >5,000g/m²·24h (EN 13795 standard).
Composite radiation protection technology
Neutron shielding: Boron compound modified EPTFE film (boron content 12wt%), neutron absorption cross section up to 3,840 barns (1eV energy), shielding rate >90% (ASTM E665 test).
X/γ-ray protection: Composite lead powder/bismuth tungstate coating (surface density 0.5g/cm²), attenuation coefficient >10 (100keV photon energy).
Customized pore size design
Gradient pore size control: The pore size can be adjusted by stretching ratio (8:1 to 12:1) and sintering temperature (300-340℃) to adapt to different scenarios:
Medical grade: 0.2-1μm pore size (bacteria-blocking and breathable)
Industrial grade: 5-10μm pore size (dust filtration)
Aerospace grade: 20-50μm pore size (quick sweat discharge + thermal radiation reflection)
Zero pollution production system
Environmentally friendly adhesive: Using Huntsman water-based polyurethane (pH 6.5-7.5), VOC content <10ppm (GB/T 23985 test).
Closed-loop manufacturing: Solvent recovery rate >95%, waste recycling into low-end industrial filter material (recovery rate 85%).
Our Factory
Our factory specializes in the production of e-PTFE and its composite materials, with over 10 years of industry experience. We carefully select high-quality raw materials and strictly control every aspect of production to ensure flawless products. At the same time, we implement comprehensive quality inspections to ensure product reliability. The factory has a professional R&D team that can work with customers to carry out customized R&D projects. In addition, we have established long-term cooperative relationships with suppliers, and achieved cost savings by optimizing production processes and cost control, and relying on large-scale production and automated processes. We are always committed to providing customers with high-quality, customized e-PTFE and composite materials products, and winning the market's trust with professionalism and focus. Welcome new and old customers to consult and order.


Hot Tags: eptfe technical textiles, China eptfe technical textiles manufacturers, suppliers, factory, eptfe membrane for energy storage, eptfe membrane for cleanroom applications, eptfe membrane for air filtration, eptfe membrane for automotive applications, eptfe membrane for fireproofing, eptfe membrane for customization

